TIG Q28 Series
Available in 3 versions: Q28, Q28 BNC, and QL
The Q28 timecode generator is just 2.8 cubic inches and only 1.9 ounces. Loaded with features, its tiny size fits even the smallest cameras and rigs. It’s intuitive design allows for fast and easy set up while it’s standard locking connectors means fewer possible problems in the field. It is built from durable aluminum and runs off of replaceable AAA batteries.
The Q28 works with all standard frame rates, cross jams, has a frame rate discrepancy indicator, and a jamming indicator. The variable timecode output level and “flow through audio design” adds practicality for cameras and recorders that are not designed to receive timecode. It also has a feature which shows the timecode in hours and minutes. Overall the Tig Q28 is unbelievably small and “just works”.
•Incredible Small Size- At only 2.8 cubic inches, it fits even the smallest cameras and rigs.
*Uses Standard BNC or 5 pin Lemo connectors that lock for additional security.
•Variable Timecode Output Level- The output level has 15 adjustable settings between 6mV and 3V with a range of 54dB. This means it will work with many recorders, cameras, and devices (including Apple “i” products).
*Intuitive controls for quick set up.
•Flow Through Audio- The Q28 offers a timecode solution for single input cameras and recorders. It combines both the audio and timecode into a single output so that it works with devices that do not have timecode inputs (i.e. DSLR’s).
•“Show” Position for current timecode When the switch is turned to the “show” position, the Tig will tell you the current timecode in hours and minutes.
•Frame Rate Discrepancy Indicator will evaluate the incoming timecode rate and flash two seconds on, two seconds off to let you know the rate you are cross jamming. This eliminates jamming incorrect frame rates.
•Jamming Indication will flash one second on and one second off to reassure you that the jam is successful. If you are cross jamming, it will flash two seconds on, two seconds off.
•Supports all standard frame rates such as: 23.976, 24 25, 29.97, 29.97DF, 30, 30DF.
•The Tig will cross jam all rates and the LED will specifically indicate that it is cross jammed.
•Operated by 2 changeable AAA batteries with a battery compartment tube design.
•The Q28 is made from durable aluminum.
•Designed, made and serviced in the U.S. MozeGear is located in Irvine, CA
• Battery Power: 2 “AAA” batteries
• Variable Level Output: Adjustable between 6 mV and 3V
• Battery Life: 16+ hours
• TCXO Crystal: +/- .5PPM
• Weight: 1.9 ounces (without batteries)
• Size: 2.125" x 2.625" x 0.5"
• Casing: Aluminum
• External Power: N/A
• Output Connector: either 5 pin Lemo or BNC.
• Input Jam Connector: mini phone jack or 5 pin Lemo (3.5mm)
• Flow Through Audio Input: mini phone jack (3.5mm)